Artika Horizon LED Flush Mount: My Kitchen Light Replacement

The LED ceiling light in my kitchen quit working. I checked the wiring, but I still didn’t know why the old fixture failed. I replaced it with an Artika Horizon LED flush mount. The part I wanted to see for myself was how much difference the three white settings made in the kitchen.

What I checked before replacing the light

This was a swap at an existing ceiling light location, not a new circuit. I shut off the breaker and checked that power was off before getting into the connections. A wall switch isn’t a substitute for shutting off the breaker and verifying the circuit is de-energized.

My video shows what I found at my ceiling, not how every ceiling box is wired. Read the Artika installation manual for your exact fixture. If you can’t verify the power is off, identify the wiring, or confirm the box can support the light, stop and call a licensed electrician. Check local requirements before you start.

What the Artika Horizon has

The Artika Horizon FM-HOC-C is a 13-inch fixture with integrated LEDs, so there’s no separate bulb to swap. Artika lists 1,800 lumens and a rated life of 50,000 hours. Those are the manufacturer’s numbers. In this video I checked that the light worked and compared how the three settings looked; I didn’t measure output or test lifespan.

The small selector is on the fixture itself. I show it at about 1:18. It gives you three shades of white: 3000K is warm, 4000K is neutral, and 5000K is cool. Those settings change the color of the light. Dimming is separate and needs a compatible LED dimmer, which I didn’t test in this video.

Close-up of the three-position color-temperature selector beside the Artika Horizon’s LED array.
The switch on the fixture selects warm, neutral, or cool white.

Why I picked the coolest white in my kitchen

Skip to 3:14 for the light test. I tried all three and liked the coolest, whitest setting for my kitchen. That was my preference in this room, not a measurement showing that one setting put out more light. If you like the warmer look of a traditional bulb, compare 3000K with 4000K instead of assuming you’ll want the setting I picked.

Braden looks up at the illuminated Artika Horizon on his kitchen ceiling.
I compared the three white settings and kept the coolest one for my kitchen.

At about 3:37, I put on the diffuser. Mine clicked into three clips. The cover hides the LED array and gives the fixture the finished look you see at the end. Since the selector is on the fixture, I’d decide which shade I want before buttoning it up, following the manual for safe access and adjustment.

Braden uses both hands to fit the round diffuser onto the ceiling fixture.
I snapped the diffuser into place to finish the installation.

What I’d check before buying

Check the model number, the width of the fixture, and how it will sit against your ceiling. If your current light is on a dimmer, check compatibility before ordering. And if you prefer being able to swap in a new bulb years down the road, keep in mind this model uses an integrated LED.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

See the Artika Horizon LED flush mount on Amazon.

For more projects I’ve worked through myself, see my DIY & How-To guides.